View source for Consultation and synchronization of remote contacts on IPBrick

''' ***PAGE ON CONSTRUCTION***'''


It is possible to perform two types of LDAP search on Yealink phones:
# IPBrick LDAP users
# IPBrick Contacts (contacts.domain.com)

Relevant information:

* Name of the server (FQDN): ipbrick.domain.com
* IP (ETH0): 192.168.69.199
* Contacts: contacts.domain.com
** IPBrick contacts user, with reading permissions: yealink_contacts
** Password: *************

== IPBrick LDAP Users ==

<source lang="bash">
#######################################################################################
##It enables or disables LDAP feature.0-Disabled,1-Enabled.
##The default value is 0.
ldap.enable = 1
 
##It configures the criteria for searching the contact name attributes.
##Example:ldap.name_filter = (|(cn=%)(sn=%)).
##The default value is blank.
## ldap.name_filter = (&(|(cn=%)(sn=%))(|(SIPIdentityVoipUserAlias=*)(mobile=*)(telephoneNumber=*)(SIPIdentityDefaultPhone=*)))
ldap.name_filter = (&(|(cn=%)(sn=%))(|(SIPIdentityVoipUserAlias=*)(mobile=*)(telephoneNumber=*)(SIPIdentityDefaultPhone=*))(|(objectClass=qmailUser)(&(objectclass=contact)(o=ipbrick))))
 
##It configures the criteria for searching the contact number attributes.
##Example:ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%))
##The default value is blank.
ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%)(pager=%)(departmentNumber=%)(SIPIdentityDefaultPhone=%)(facsimiletelephonenumber=%)(SIPIdentityVoipUserAlias=%))
 
##It configures the IP address or domain name of the LDAP server.
##The default value is blank.
ldap.host = 192.168.69.199
 
##It configures the port of the LDAP server.
##The default value is 389.Integer from 1 to 65535.
ldap.port = 389
 
##It configures the LDAP search base which corresponds to the location of the LDAP phonebook.
##Example:ldap.base = dc=yealink,dc=cn.
##The default value is blank.
ldap.base = dc=domain,dc=com
 
##It configures the user name for accessing the LDAP server.
##The default value is blank.
ldap.user = uid=yealink_contacts,ou=users,dc=domain,dc=com
 
##It configures the password for accessing the LDAP server.
##The default value is blank.
ldap.password = pass_busca_contacts
 
##It configures the maximum of the search results returned by the LDAP server to be displayed.
##The default value is 50.Integer from 1 to 32000.
ldap.max_hits = 500
 
##It configures the name attributes of each record to be returned by the LDAP server.
##Multiple attributes are separated by spaces.Example:ldap.name_attr =sn cn.
##The default value is blank.
ldap.name_attr = cn
 
##It configures the number attributes of each record to be returned by the LDAP server.
##Multiple attributes are separated by spaces.Example:ldap.numb_attr = Mobile ipPhone.
##The default value is blank.
ldap.numb_attr = SIPIdentityVoipUserAlias mobile telephoneNumber departmentNumber pager SIPIdentityDefaultPhone
 
##It configures the display name of the contact record displayed on the LCD screen. The value of this parameter must start with ¡°%¡± symbol.
##Example:ldap.display_name = %cn
##The default value is blank.
ldap.display_name = %cn
 
##It configures the LDAP version.
##The default value is 3.
ldap.version = 3
 
##It enables or disables the phone to perform an LDAP search when receiving an incoming call.
##0-Disabled,1-Enabled.
##The default value is 0.
ldap.call_in_lookup = 1
 
##It enables or disables the phone to sort the search results in alphabetical order or numerical order.
##0-Disabled,1-Enabled.
##The default value is 0.
ldap.ldap_sort = 1

##It is the electricity + start, automatic search + 00 the beginning and the beginning of the numbe
##The default value is 0.(0-Disable,1-Enable )(Except T19P/T21P Models)
ldap.incoming_call_special_search.enable =
##The default value is 0,value of 0 to 2, respectively the ldap, ldap + StarTLS and ldaps
ldap.tls_mode = 
ldap.call_out_lookup =
#######################################################################################
</source>


== IPBrick Contacts ==

<source lang="bash">
#######################################################################################
ldap.enable = 1
ldap.name_filter = (|(cn=%)(sn=%))
ldap.number_filter = (|(telephoneNumber=%)(Mobile=%)(IPBrickPhone=%))
ldap.host = 192.168.69.199
ldap.port = 389
ldap.base = ou=Contacts,dc=domain,dc=com
ldap.user = uid=yealink_contacts,Ou=Users,dc=domain,dc=com
ldap.password = pass_busca_contacts
ldap.max_hits = 300
ldap.name_attr = cn displayName
ldap.numb_attr = Mobile IPBrickPhone telephoneNumber
ldap.display_name = %cn
ldap.version = 3
ldap.call_in_lookup = 0
ldap.ldap_sort = 0
#######################################################################################
</source>